{March kit} - "Inspire"

Inspiration

PDW March main kit

Supplies needed:

Basic tool kit

Xacto knife

Sanding block

Mini glue dots

Paper distresser

Ok..lets get started….{ at the end of the project…you will have a TON of extras…that was my main goal for this kit club…to be able to do a project and then have leftovers for other things like layouts cards….anther mini book. and so-on…}

Prep Work:

You have 5 pages, 10 total front and back…you will need 8 pieces of pictures of stuff that inspires you…you can add more..like I cut magazines and stuff..and saved tags…Have FUN with this…really add stuff that YOU love and are inspired by…journal why this stuff inspires you..ok I cannot wait to see your creations..and all your inspirations…You can sand or ink your edges (I am a sander)..i used my paper distresser on this whole book Now we are ready to get started….

One more things…this is going to be a repetitive process in the book…TAKE the pattern papers that you have chosen and for all the inserts (inside pages) trim you papers to 3 ½ x 5 for the back ground piece…DO NOT put it over the holes…just right up to the holes and then trim off the excess on the side…make sense…and then for the strips they are 1 ½ x 6 ½ …on one of the pages I think it is a little wider…but that is the base of EACH page and I just turned the strip form like vertical to horizontal….

Cover and back cover:

{Supplies needed: 3 pattern paper, cover, paper flowers, felt flower, brad, and thickers}

1. Trim a piece of pattern paper to 2 x 5 and adhere to the center of cover..remeber you to sand or use your distresser on the paper.
2. Take a snippet of the pattern edge paper and adhere it under the other pattern paper..so you have a little scallop…
3. Take a piece of pattern paper and trim it into a square. Adhere the square to the cover and layer the flower to the square. Adhere the flower to the cover.
4. Now take your thickers…and adhere them to the cover..what ever title you would like..it is your book so it DOESN’T have to be about inspiration…
5. back cover…just adhere the same pattern  paper to the back side.

Page 1: backside of cover

{Supplies needed: covered insert, scallop chipboard piece, bling, white large tag, snippet of pattern paper, pink note paper}

1. Take your covered insert and adhere your inspiration.
2. Take chipboard piece and paint it. ..sand edges once dried..and adhere some black rhinestones to the scallops.
3. Tag insert: adhere the pink note paper to the tag..i tore it down one side. Take a snippet of pattern paper and adhere to the tag..as seen in the photo…tie a piece of fabric to the tag.

Page 2:

{Supplies needed: covered insert, back side of tag, mm die cut, bling, pattern paper, }

1. Take your covered insert and adhere your inspiration.
2. Adhere the “be creative” die cut or one of your choice to the page and add some bling to it.
3. Take the back side of the tag insert…and adhere a piece of pattern paper to the tag..letting a little bit of it hang off the side. (note: the chipboard piece I used is from the other kit..oooppsss I know…but I am sure you have something that can go there )

Page 3: backside of 2

{Supplies needed: covered insert, paper die cuts, tag rest of pink note paper, chipboard tab, felt flower, metal embellishment, JB rub-ons}

1. Take your covered insert and adhere your inspiration
2. Adhere a making memories die cut of your choice.
3. Adhere title to page using the JB rub-ons.
4. Tag insert: adhere the reaming piece of pink note paper to the tag. Adhere the paper photo corner to the tag. Ink the chipboard tab a color of your choice and then place that on the side of the tag. Take small felt flower and metal piece and adhere it to the tab.

Page 4:

{Supplies needed: covered insert, jotter, MM paper tag, alpha thickers, flower embellishment}

1. Adhere the jotter to your covered insert. Then adhere your inspiration.
2. Take large die cut flower and layer the other embellished flower onto the paper one. Adhere this on the lower right side of page.
3. adhere your title using the alpha thickers.
4. Tag insert: take the back side of the tag (from page 3) and adhere note paper, then take the paper tag and adhere it to the tag. Using the Kaiser rub-ons andhere a rub-on of your choice to the small tag and then some bling.

Page 5: backside of 4

{Supplies needed: covered insert, fabric, felt flower, mirrors, thickers, peals,  rubons, large paper flower, silk flower, note paper}

1. Take your covered insert and adhere your inspiration. NOW mine is fabric SO I sued the fabric pieces as my photos…NOW you can still do this fabric border on your page ALL you do is just take some snippets and fold them in half and staple, and then layer them down the page.
2. Take felt flower and layer in and adhere it to the left side of the page.
3. adhere a title using the alpha thickers,
4. Take the mirrors and adhere the rub-ons to them {one of my favorite things to do} and adhere them on each side of your title.
5. Tag insert: take a piece of pattern paper and adhere it to the tag..letting a little bit of it hang off. Adhere the note paper to the tag. Adhere the paper flower to the upper right side of tag. And place the silk flower in the center of the paper flower.

Page 6:

{Supplies needed: covered insert, note paper, rub-ons (flower) white bauble}

1. Take your covered insert and adhere your inspiration
2. Take the flower rub-ons and adhere one to the upper right side, place the white bauble into the center of flower.
3. Tag insert: adhere your black scalloped note card to the tag, letting some of it hang off, adhere the note paper to the tag. Place the plastic flower onto the center of the tag.

Page 7: back side of 6

{Supplies needed: covered insert, paper die cut frame, thickers, rub-ons, ribbon, mirror, pearls, black metal border, gems}

1. Take your covered insert and adhere your inspiration
2. Highlight one of your inspirations with the paper frame.
3. Adhere your title using the thickers.
4. I added some rub-ons and doo-dahs to this page.
5. Tag insert: take a snippet of pattern paper and place onto tag, adhere some note paper to the tag. Take metal border and adhere to the right side of tag. Place gems in the scallops {so cute}. Take some snippets of ribbon and create a tab, as seen in photo. Take the mirror and adhere a rub-on to it and place that on the tab.

Page 8:

{Supplies needed: covered insert, felt flower, jotters, label stickers, pearls, thickers}

1. Take your covered insert and adhere your inspiration
2. Adhere the layered felt flower to the right side of page.
3. Adhere a title using your thickers or rub-ons.
4. Adhere the label stickers randomly to the page.
5. Tag insert: adhere a snippet of pattern paper to the tag, using a jotter adhere that to the tag. Adhere a label sticker to the tag. Adhere pearls to the scallops on the metal border.

YEA!!! We are done. Well almost…putting it all together, just stack all of it  and place the rings in the holes…and ADD LOTS of ribbon and your fabric …this little book can be so crammed with stuff…so whatever you make of this album…I hope you had as much fun as I did creating it….  enjoy..